1 Tandem Axle Trailer, 7’x14’ body, 10000 GVWR. See REF section for full vehicle specifications, to which Aries will include:

• 1 Spare tire storage area

• 2 Adjustable LED floodlights, mounted above rear doors

• 1 Vehicle exterior lighting package, including: 1 LED traffic advisor, mounted rear facing, with cab mounted controller, 2 Amber LED strobe lights, 1ea mounted front and rear of roof, 1 Strobe control switch in traffic advisor controller

1 7,000W, gas powered, commercial grade generator, 120V, 60 Hz, with electric local and remote start/stop control to include:

• 1 OEM generator enclosure, tongue mounted, with 14-gallon EVAP-certified fuel tank

• 1 Vented cover with lock mechanism

• 1 Exhaust system with internal muffler

• 1 Auxiliary battery, 12V DC and case, mounted on tongue frame

• 1 DC converter, 45A

• 1 Electric distribution panel and circuit breaker box, 16-space

• 1 Electric supply transfer system, house power or generator system, automatic, 50A

• 1 35’ cord and house power receptacle with integrated cover, mounted front of trailer

• 1 System engineering panel to include: 1 Generator Voltage and frequency meter, digital, 1 Generator start/stop switch, 1 Generator hour meter

• 1 Trailer control room interior including:

• 1 Lonplate non-skid floor covering

• 1 White Kemlite laminated surface wall and ceiling covering

• 1 Bulkhead wall with Plexiglas window and swing passage door to equipment room

• 1 Low profile roof mounted air conditioner, 11000 BTU

• 1 Wall mounted 1500-watt heater with wall mounted on/off switch

• 1 Modular control center, 19” rack mounted above bulkhead window

• 1 Ergonomically contoured and finished control desk

• 1 Under-desktop storage drawer

• 1 LED lighting system with dimmer switch

• 1 Standard electrical upfitting package

• 1 Operator chair, post mounted, supplied by 502 Equipment

• 1 Padded bench seat with storage underneath

• 1 Closet/cabinet/storage space, 74”H, minimum 4 removable shelves

• 1 Printer shelf

• 1 Netted storage, 8x12, shipped loose for customer install

• 1 Dry erase board, mounted above desktop

• 1 Bulletin board, mounted to front wall

1 Trailer equipment room interior including:

• 1 Lonplate non-skid floor covering

• 1 White Kemlite laminated surface wall and ceiling covering

• 1 Standard electrical upfitting package

• 1 LED lighting system

• 1 Fire extinguisher, 10lb, 4A60 B:C rating, OSHA/DOT-approved

• 1 Wall mounted 1500-watt heater

• 1 5-drawer tool chest, Craftsman Griplatch, mounted in bulkhead wall

• 1 Storage shelf/cubby, mounted in bulkhead wall, with interior white Kemlite laminate

• 1 Storage shelving unit, 2-shelf, street side wall, 37x12

• 1 Workbench with Lonplate worktop, curb side wall

• 1 Storage cabinet underneath bench, for washdown components, with interior aluminum laminate

• 1 Storage cabinet above workbench, with latched swing doors, with light underneath and interior aluminum laminate

• 1 5in vise mounted to workbench

• 1 Sanitizer and dispenser, shipped loose for customer install

• 1 Paper towel holder, shipped loose for customer install

• 1 Pit Pal wall organizer

• 1 Set of tie down brackets for floor, shipped loose

• 1 Slat wall storage system (items shipped loose for sales to configure)

• 1 Hook set, 20-piece

• 1 Cord/Hose holder, 2-piece

• 1 Shelf and paper towel holder

• 1 Storage bin kit, 18ct

• 1 Large storage bin kit, 2ct

• 1 Tool holder kit, magnetic, 2ct

1 Water wash down system for equipment clean-up including:

• 1 Water storage tank, 19-gallon

• - 1 120V tank heater blanket with switch

• 1 Set of fill, vent and drain connections

• 1 Water tank demand pump

• 1 25’ retractable wash down hose with spring-loaded hand nozzle

1 Equipment hoist, 500lb. rating, with swing boom storage

• 1 Mounting kit for top of PR2200 reel

1 22” LCD flat panel monitor, TV/PC viewing, mounted above control room desktop

1 22” LCD flat panel monitor, TV/PC viewing, mounted above control room desktop

1 5” LCD flat panel monitor, dedicated lateral viewing, mounted above desktop

1 24” LCD flat panel monitor, TV viewing, mounted rear facing in the equipment room

1 Aries VL5000 video data display including:

• 1 Data display control module, panel mounted

• 1 Alpha/numeric full QWERTY keyboard for video titling and report data input for VL5000 display

• 1 Set of interconnect cables

1 Rack-mounted computer and video overlay system, including:

• 1 Industrial hardened case with air filtering, shock mounts for hard drive and CPU fan, peripheral cards support bar, 19” rack, 3U high

• 2.1GHz Intel 12th Gen Core i7 processor, 16MB cache

• 16GB of RAM, DDR4

• 960B solid state hard drive, storage

• 240GB solid state hard drive, boot

• (2) RJ45 ethernet ports

• (10) USB ports, 4x USB3.0 + 6x USB2.0, 2x USB3.0 located on front of PC

• Serial port on rear of chassis, DB9

• Wireless network adapter

• 1 Wireless keyboard and optical mouse

• 1 Windows 10 operating system, 64-bit

• 1 1TB USB-connection external hard drive

1 UPS back-up battery system, rack mount

1 Video capture device for post-delivery transfer of Phoenix software

1 Aries PC5100 Master Controller system, multi-conductor, including:

• 1 System power supply and control unit, 19” rack mount

• 1 Pegasus system control software, loaded on USB flash drive

• 2 Wireless Xbox One X style handheld controller

• 1 Wire for direct hook up / charging of Xbox One X style controller

• 1 Wall mounted USB port for controller

Aries PE3530 Pathfinder series zoom, pan & tilt camera w/ high-intensity LED lighting and integrated self-cleaning lens wiper system, including:

• Pathfinder zoom pan and tilt camera w/ multi-axis infinite rotation

• Integrated on-demand self-cleaning lens wiper system

• 120X zoom (10X optical & 12X digital)

• High-resolution 480(V) x 720(H) output

• Auto-focus with manual override

• Auto-iris with manual override

• Maintenance-free forward-facing white LED lighting located in the camera forks

• Maintenance-free directional white LED lighting that follows the camera’s field of view

• White balance optimization with (4) selectable settings

• High-sensitivity camera sensor for low-light applications

• “Starlite” low-light level amplification feature with (4) user selectable amplification steps

• Automatic home feature with forks at side of camera head

• Robust, environmentally sealed camera for use in live pipe, including:

• Scratch-resistant sapphire lens window

• Camera recessed behind forks for frontal impact protection

• Camera housing with hardened metal finishes and non-corrosive metals

• Recessed fasteners & no camera protrusions

• Proportionately slowed camera movements when zooming

• Fast-check internal pressure monitoring system

• On-screen camera diagnostics functions including:

• Camera internal pressure, temperature, operating hours, internal power regulated voltage value, camera model, serial number, firmware revision, control error recognition, LED current value.

• 1 Camera storage and transport case

• 1 Camera nitrogen recharge kit

1 Aries TR3320 Pathfinder steerable self-propelled transporter for 6” to 36” lines, including:

• 1 Tractor assembly with continuous duty drive motors

• 6 Rubber wheels, 3” diameter

• 4 Rubber wheels, 4” diameter

• 4 Extended hub rubber wheels, 4” diameter

• 4 Extended hub rubber wheels, 5” diameter

• 1 Remotely-operated electric camera lifting mechanism

• 1 Fast-check pressure monitoring system

• 1 Rear viewing camera with LED lighting

• 1 512 Hz internal locating beacon

• 1 Integrated inclinometer system

• 1 Storage and transport case

• 1 Set maintenance parts

4 Double wide “dually” extended hub wheels for larger lines, 5” diameter

2 Carbide impregnated high traction wheels, 3” diameter

2 Carbide impregnated high traction wheels, 4” diameter

2 Extended hub carbide impregnated high traction wheels, 4” diameter

2 Extended hub carbide impregnated high traction wheels, 5” diameter

1 Large diameter pipe kit with geared side rails and 8” diameter rubber tires for operation up to 36” lines

1 Auxiliary detachable light head

1 Aries PR3320 Pathfinder cable and reel assembly, including:

• 1 1000’ of lightweight low friction multi-conductor cable

• 1 Heavy-duty frame, drum and motor assembly with clutch and cable level wind assembly

• 1 Front control box with distance display and electrical controls, weather resistant

• 1 Emergency hand crank arm

• 1 Spare cable termination kit

• 1 Sealed continuous contact collector assembly, 12 slip rings minimum

• 1 Telescoping swivel cable guide roller assembly

• 1 Pathfinder system test cable

• 1 Reel controller with desktop mounting devices

• 1 Interconnect cable to TV system electronics

• 1 Drip pan with drain

1 Mounting kit for top of PR2200 reel

1 PR2200 combined TV and LETS cable reel, clutched electric motor drive, to include:

• 1 Heavy duty aluminum frame

• 1 Footage meter on TV reel level wind assembly with local footage readout and encoder for footage signal to remote video data display system

• 1 Sealed continuous contact collector assembly, 12 slip rings minimum

• 1 Slide out cable guide assembly

• 1 Removable drip pan

• 1 Local reel mount electrical controls with emergency stop

• 1 Remote desktop electrical controls

1 Mainline combination TV transmission and tow cable assembly, .43" diameter, Kevlar armored, 2,000 lb. rating, 1,000' Red Maxx, to include:

• 1 Cable terminal connector, 12-pin molded

• 1 Dummy plug, 12-pin

• 1 Tow/tag line bridle set, multi-conductor cable

• 1 Clam-shell style strain relief

• 1 Cable termination repair kit

1 Lateral combination TV transmission and push cable assembly, including:

• 1 1000’ multi-conductor cable

• 1 Field termination kit for cable

• 2 Push cable assemblies (.52"), 120', for 3", 4" and 6” laterals

1 24-pin switchover and test cable system, for Master Controller setup

1 Aries LE3270 Lateral Evaluation Televising System (LETS) with fixed locating camera, including:

• 1 Tractor/launcher assembly with

• Front viewing camera

• Rear viewing camera

• Tip-up connector

• Lateral launcher with rotation and insertion angle positioners, and push cable drive

• Lateral footage encoder

• 6 Each of 3”, 4” and 5” diameter rubber wheels for 6” to 12” sewer lines

• 6 3” diameter carbide high traction wheels

• 1 Launch chute for use in 6” and 6” relined pipe

• 1 Launch chute for use in 8”-12” sewer lines

• 1 Maintenance tool kit

• 1 Set of test cables

• 1 “Tigertail” downhole guide tube

• 1 Set of video A/B switching equipment for PIP operation

1 ST930 push camera, color, self-leveling, with lighthead, 512Hz beacon, spring neck, skid, and case

1 Aries PE3601 pan and tilt camera w/ high intensity LED light ring, including:

• 1 Pan and tilt camera w/ infinite axial and pan/tilt rotation

• 1 Maintenance-free true color warm white directional LED directional lighting system with internal regulators for inspecting up to 6” pipelines

• 1 Remote focus (continuous)

• 1 Internal beacon electronics (On/off control)

• 1 “Smart Upright Home” circuitry (electronic gravity sensor)

• 1 Lens/light wiper to clear obstructions

• 1 Camera storage and transport case

• 1 Spare parts / camera recharge kit

1 Long steering probe, PE3601

1 Cable manhole guide system including:

• 1 Manhole top roller assembly

• 1 Insertion and extractor pole assembly and tractor adapter

• 3 Quick lock extension poles

• 1 Manhole bottom roller assembly and adapter hook

• 5 Quick lock extension poles

• 1 Tiger tail bottom cable guide

• 1 Downhole pole storage brackets, RR trailer door

2 Operation / maintenance and spare parts manuals

1 Maintenance tool kit

1 Delivery of system

1 One year warranty, TV system

2 Days of training

Trailer, 7’x14' Tandem Axle, 10,000 lb. GVWR

Standard Construction

• Interior dimensions: 80" wide x 83" high x 168" long
• Gross Vehicle Weight Rating: 10,000 lbs
• Dexter independent torsion suspension axles
• Trailer-rated radial tires
• Modular-styled wheels w/E-coat prime & powder coat finish
• All-wheel electric brakes w/12V breakaway switch, battery included
• Welded in place safety chains
• Automotive style weather stripping
• Formed steel rear header with recessed clearance lights
• 12” on-center Floor Members
• .030 exterior aluminum with 16” on-center wall posts
• Aluminum fenders
• Aluminum roof with 24” on-center bows
• ABS molded license plate holder with light

Additional Construction

• Extended triple tube tongue with 2-5/16” ball hitch and switchable pintle hoop
• ATP stone guard on front of trailer
• Stabilizer jacks at corners
• 32” curbside door with bar lock
• Double swing full opening rear doors with semi-style cam locks